Decorating part 2
When we moved into our house we needed a dining room table and chairs. We headed to Ikea and picked up wooden table with black metals legs and four chairs to match. Our dining table is used much more for crafting on than eating on, and over the years it was been scratched, marked and faded in places. The chairs also showed signs of wear and tear. The chair seat design was made up of four pieces of wood, placed to form the seat, with gaps in between each piece. This design had often puzzled me as it was really difficult to clean in between the pieces, which meant the gaps were hoarding all sorts of dirt and crumbs. I was keen to change this if I could.
I cleaned the table top and legs with sugarsoap, rinsed them well and left it to dry. For each of the chairs, I unscrewed the four pieces that made up the seat, gave them a really good clean, rinsed them and then left them to dry. When I put the four pieces of wood back to create the seat I pushed them together and screwed them into new holes. This meant no more silly gaps between each piece and they looked really good like that too. I gave the wooden sections a light sand, and used wood filler on a few of the bigger dints on the chairs and table top. Once the wood filler was dry, I lightly sanded them again. When you have finished sanding always give them a wipe with a slightly damp cloth to remove any dust before painting or staining.
I gave the wooden table top and the wooden seats a coat of Teak Oil, applying it with a varnish brush and then buffing it a little with the lint free cloth. I left it to dry as per the instructions on the Teak Oil tin, then gave it another two coats. The difference it made was amazing. The wood had a lovely shine to it, a much smoother finish and looked like new again. I had used the same Teak Oil on the welsh dresser and on a mirror so they all matched perfectly.
I used Colron refined Teak Oil, for 500ml it is around £9 and one tin did our welsh dresser, table, chairs and mirror with a little left over. You don’t need much oil and you need to spread it out as evenly as you can, which is why it’s good to use a brush to spread the varnish out, then the cloth to ensure there is no excess and to give it a good buff.
I have also made a table protector out of fleece and non-slip mat. When I am crafting at the table I can put my table protector down to make sure I don’t mark our new lovely, shiny table! I had some cushions in my craft room which matched the colour scheme so they were perfect for the chairs. It cost us less than £20 and the table and chairs look like new.